G60 NTC Constant Heat Control High Speed Hair Dryer Dual Duct Brushless Motor
G60 high speed hair dryer with NTC intelligent temperature control and 110,000 RPM airflow.
NTC Heat Control
,Brushless Speed Motor
,Dual Duct Airflow
Product Overview
['Heat stability is what separates a dryer that feels controlled from one that feels hot. The G60 samples the outlet through an NTC sensor and trims the heater as airflow changes, so dropping to low speed does not push the temperature up, and a stylist can hold a band on fine hair without watching the clock.']
The G60 uses a dual duct layout. The intake and the outlet sit on separate paths inside the housing, so the air the motor draws in is not heated air coming back off the barrel. In a 1200 W body that separation is what keeps the air column tight at the nozzle: the motor is not working against its own exhaust, and the housing stays cooler in the hand over a long session.
A 110,000 RPM BLDC brushless motor drives the airflow, and NTC intelligent temperature control samples the outlet continuously to hold the set band. Three speed settings and four temperature settings give twelve operating combinations, which covers fine hair on low heat and thick sections on high airflow without changing the dryer. The body is 315 g and 127 x 59 x 200 mm, small enough for a styling station drawer or a hotel shelf, and an LED temperature indicator on the housing shows the active heat band at a glance.
The essential oil hair care nozzle is the part that separates the G60 from a standard dryer. Care oil is fed at the nozzle and carried into the airstream while the section dries, so the treatment reaches the hair during the pass instead of being applied afterwards. Because the product sits at the nozzle rather than inside the dryer, a salon can change what it feeds without changing the hardware.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Name | G60 High Speed Hair Dryer |
| Model | G60 |
| Main Functions | Fast drying, 250 million negative ion care, NTC constant temperature, essential oil nozzle care, LED temperature indicator |
| Motor | 110,000 RPM BLDC brushless motor |
| Rated Power | 1200 W |
| Rated Voltage | Customizable (110V or 220V build to order) |
| Airflow System | Dual duct design |
| Negative Ion Output | 250 million ions |
| Temperature Control | NTC intelligent temperature control |
| Drying Modes | 3 speed settings / 4 temperature settings |
| Indicator | LED temperature indicator |
| Nozzle | Essential oil hair care nozzle included |
| Net Weight | 315 g |
| Product Size | 127 x 59 x 200 mm |
| Application | Salon use, home styling, hotel guest rooms, distributor programmes |
| Plug Type | EU / UK / US / AU plug built to the destination market |
Application Fields and Advantages
- Temperature held as airflow changes: NTC sampling trims the heater, so low speed does not mean a hotter outlet
- Predictable on fine and coloured hair: a stable band is what keeps a colour-treated section from lifting under heat
- Dual duct, separated air paths: intake and outlet run on separate paths, so the motor does not recycle its own heated exhaust
- 110,000 RPM BLDC motor: a brushless motor with a matched impeller keeps the column tight at the nozzle
- Twelve heat and speed combinations: three speed settings against four temperature settings cover fine, normal and coarse hair
- Essential oil care nozzle: care oil is fed at the nozzle and carried into the airstream during drying
Customization Service
Small Batch Customization OK | Packaging Customization OK | Color Customization OK | Free Sampling OK |
Product Q&A
Q: How often does the sensor sample?
A: The NTC loop runs continuously while the dryer is on and adjusts the heater as airflow and intake temperature change.
Q: Does it replace a thermostat?
A: No. It supplements the thermal cut-out: NTC holds the working band, the cut-out protects the unit.
Q: Does the G60 come in one voltage for all markets?
A: No. The dryer is built for the destination supply as a 110V or 220V assembly, with the heater and control board matched to that voltage, and the plug type fitted for the market.
Q: How does the essential oil nozzle work?
A: Care oil is fed at the nozzle and carried into the airstream as the dryer runs, so it reaches the section during drying. When only drying is needed, the nozzle can be left without oil.
Q: What does NTC control actually do?
A: It samples the outlet temperature continuously and trims the heater, so the set band holds while airflow changes instead of drifting hot at low speed.
Q: Why a dual duct instead of a single duct?
A: A single duct feeds part of its own heated exhaust back to the intake. Separating the paths keeps intake air cooler and gives the motor cleaner air to work with.
Q: Is 1200 W enough for salon use?
A: Drying speed comes from airflow, not wattage. The 110,000 RPM motor carries the velocity, so a 1200 W body dries at a rate closer to a larger conventional dryer.