D1 Three In One Hair Styler Comb Self Developed BLDC Motor Lightweight Body
3-in-1 hair styler comb D1 with self-developed 110,000 RPM BLDC motor, 220g lightweight body, MCH heating and 3 airflow plus 4 temperature settings.
Three In One Hair Styler
,Self Developed BLDC Motor
,Lightweight Body
D1 3-in-1 Hair Styler Comb - 220g, Self-Developed BLDC Motor
Weight is where multi-function designs usually fail. Three tools in one handpiece can end up at 400g or more, at which point users stop using it for long passes. The D1 stays at 220g because the self-developed BLDC motor is short-stacked and mounted low in the handle, and the MCH module is a thin film element rather than a heavy block. The result is a 3-in-1 hair styler comb light enough for one-handed work through a full styling routine.
Key Specifications
| Model | D1 |
|---|---|
| Format | 3-in-1 styler comb: dry, straighten, curl |
| Motor | Self-developed BLDC motor |
| Motor Speed | 110,000 RPM |
| Net Weight | 220g |
| Dimensions | 320 x 34 x 46 mm |
| Heating | MCH heating module |
| Airflow Settings | 3 levels |
| Temperature Settings | 4 levels |
| Rated Power | 1400W - 1600W |
| Rated Voltage | 220-240VAC, 50/60Hz |
| Display | LCD colour screen |
Design Choices That Keep It at 220g
- A short-stack self-developed BLDC motor delivers 110,000 RPM without the length and mass of a conventional AC fan assembly.
- The motor sits low in the handle, so the 220g handpiece balances near the palm instead of tipping forward at the comb head.
- MCH heating is a thin film element: it heats quickly, holds temperature and adds far less weight than a ceramic block.
- Three airflow levels and four temperature levels cover drying, straightening and curling without extra attachments.
- The LCD colour screen replaces a stack of indicator LEDs and switches, reducing both parts count and failure points.
- Auto pause and standby keep the element from idling hot between sections, which extends both safety and component life.
Application Scenarios
- Daily home styling where users want one tool on the shelf, not three.
- Salon blow-dry finishing where speed of section work matters.
- Beauty academies teaching multi-function styling technique.
- Retail and marketplace sellers consolidating three listings into one SKU.
Manufacturing & Quality Control
Motor quality gates follow the same path as our high-speed dryer platform: dynamic balance, 1,500V hipot and a 30-minute full-load burn-in on every self-developed BLDC unit. Because the D1 is a multi-function device, function interaction is tested as a system, with airflow, MCH temperature and LCD state checked together at each of the twelve setting combinations. Units are then weighed, drop tested in retail cartons and sampled for noise at full airflow.
Frequently Asked Questions
Q: Is the 3-in-1 function real or just marketing?
A: Each function has its own hardware path: airflow from the 110,000 RPM BLDC motor for drying, MCH heat plus airflow for straightening, and reduced flow with edge shaping for curls. All three are tested as a system before packing.
Q: How light is it compared with similar stylers?
A: 220g, which is roughly half the weight of typical three-in-one stylers that use an AC fan plus a ceramic heater block.
Q: Can the comb be used on wet hair?
A: Yes. The D1 is dry and wet capable, and the airflow settings let users start on wet sections and finish on dry ones without changing tools.
Q: What is the MOQ and lead time?
A: 2,000 pcs minimum with 30-45 days production after deposit, and sample units available from current stock.