D1 Air Straightener Comb Self Developed Brushless Motor MCH Heating Control
D1 air straightener comb pairing a self-developed 110,000 RPM brushless motor with MCH heating, 4 temperature settings and a 220g body.
Air Straightener Comb
,MCH Heating Control
,Self Developed Motor
D1 Air Straightener Comb - MCH Heating with a Self-Developed 110,000 RPM Motor
MCH, or metal ceramic heater, is the reason the D1 can hold a straightening temperature in a 34 mm body without a heavy thermal block. It ramps fast, distributes heat evenly along the contact surface and cools predictably, which is what protects the cuticle during repeated passes. Combined with the self-developed motor platform, the air straightener comb reaches a straight finish in one pass for most hair types, so the tool spends less time in contact with the hair overall.
Key Specifications
| Model | D1 |
|---|---|
| Type | Air straightener comb |
| Motor | Self-developed brushless motor |
| Motor Speed | 110,000 RPM |
| Heating Module | MCH heating module |
| Temperature Settings | 4 levels |
| Airflow Settings | 3 levels |
| Rated Power | 1400W - 1600W |
| Rated Voltage | 220-240VAC, 50/60Hz |
| Net Weight | 220g |
| Dimensions | 320 x 34 x 46 mm |
| Display | LCD colour screen |
Straightening Performance Details
- MCH heating reaches working temperature in seconds and recovers quickly, so the comb does not cool down between sections.
- Four temperature settings cover fine, normal, coarse and chemically treated hair without a separate device.
- The self-developed 110,000 RPM brushless motor dries the section as it straightens, so a single pass replaces the usual dry-then-iron sequence.
- Airflow and heat are controlled independently, letting stylists run high airflow with moderate heat for fragile hair.
- The 34 mm comb head keeps contact pressure even along the length, reducing the repeated passes that cause heat damage.
- At 220g the air straightener comb stays controllable at the ends of the hair, where most straightening errors happen.
Application Scenarios
- Straightening and smoothing services in salons and barbershops.
- Keratin and colour-treated hair that needs controlled, even heat.
- Home users replacing a flat iron with an airflow-assisted comb.
- Bridal and event styling where a one-pass finish saves time.
Manufacturing & Quality Control
The MCH module is validated with a 10,000-cycle heating test, with surface temperature mapped at nine points to confirm even distribution, then verified again at each of the four settings. The self-developed 110,000 RPM brushless motor passes dynamic balance, hipot at 1,500V and 30-minute full-load ageing. Because heat and airflow interact, units are tested in combination at maximum temperature with maximum airflow, the harshest condition for both the element and the housing.
Frequently Asked Questions
Q: Why MCH instead of a ceramic plate?
A: MCH heats faster, holds temperature more evenly across the contact surface and adds less weight, which is critical in a 220g comb-format styler.
Q: Can the temperature be adjusted for fine hair?
A: Yes. Four settings run from a gentle level for fine or damaged hair to a higher level for coarse hair, and airflow can be raised independently to speed drying.
Q: Does the comb work on wet hair?
A: Yes. The D1 is dry and wet capable, and starting on damp hair with high airflow reduces total heat exposure.
Q: What is the MOQ for the air straightener configuration?
A: 2,000 pcs, with colour and artwork customisation available inside that quantity.