G103 Ion And Heat Control High Speed Hair Dryer Moisture Retention Smooth Finish
G103 high speed hair dryer combining 250 million water ions with NTC heat control at 1600 W in a 337 g body.
Water Ion Care
,NTC Heat Control
,Moisture Retention
Product Overview
Two things decide how a blow-dry looks after it cools: how much moisture is left in the cortex, and how much charge is left on the surface. The G103 addresses both in one pass, with a water-ion module releasing 250 million ions into the airflow while the NTC loop keeps the outlet inside a narrow band.
Because the loop reads the outlet rather than assuming it from the setting, the band holds as the heater and housing warm up. That is where fixed-duty dryers drift, and it is why the finish stays even from the first section to the last.
The air multiplier duct turns the motor stream into a wide velocity band, so a pass covers the section rather than a line. Eight airflow modes set how that band is used, from scalp drying to cool finishing, and the four colour temperature lights make the active heat band readable across a salon floor.
Heat sits under an NTC loop that samples outlet temperature fifty times per second. The correction happens before the element overshoots, which is the difference between a fast dryer and a hot one: the section dries quickly without the surface reaching the temperature where colour and keratin treatments break down.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Name | G103 High Speed Hair Dryer |
| Model | G103 |
| Main Functions | Fast drying, water ion care, NTC constant temperature, four colour indicator |
| Motor | 110,000 RPM BLDC brushless motor |
| Hair Type | All hair types |
| Max Power | 1600 W |
| Voltage | Customizable (110V or 220V build to order) |
| Application | Salon finishing, home styling, travel retail |
| Airflow | Air multiplier duct |
| Drying Speed | 15 second rapid drying on short hair |
| Temperature Control | NTC intelligent control, 50 samples per second |
| Negative Ion | 250 million water-ion output |
| Blowing Modes | 8 modes |
| Indicator | Four colour temperature lights |
| Dimensions | 95 x 68 x 250 mm |
| Weight | 337 g |
Application Fields and Advantages
- Moisture kept inside the cortex: ions and a controlled band reduce the water loss that leaves hair looking dry after cooling
- Consistent from first section to last: the loop corrects for heat soak, so the band does not climb during a long session
- Eight airflow modes: scalp drying, body drying, styling and cool finishing are separate settings rather than one compromise
- Four colour indicator: each light maps to a heat band, so the setting is readable across a salon floor
- Water ion care: 250 million ions ride the airstream and settle static during the drying pass
- Balanced at 337 g: the weight sits in the handle, which matters on the last section of a long session
Customization Service
Small Batch Customization OK | Packaging Customization OK | Color Customization OK | Free Sampling OK |
Product Q&A
Q: Does the ion output change with heat setting?
A: No. The module has its own supply in the barrel, and it is thermally separated from the heater, so output holds across the heat bands.
Q: Which hair types benefit most?
A: Fine, lightened and keratin-treated hair show the difference first, because they lose moisture and pick up charge fastest.
Q: Can the voltage be set for the destination market?
A: Yes. Each order is assembled for the destination supply in 110V or 220V builds, with rating label and plug type set at packing.
Q: Why four colour lights instead of one?
A: Four lights map to four heat bands, so the active band is readable at a glance and from a distance, which matters on a salon floor and in shared use.
Q: Does the ion output depend on the mode?
A: The module runs from its own supply inside the barrel, so output stays stable across the eight airflow modes and the four heat bands.
Q: Is the body light enough for long sessions?
A: The unit weighs 337 g at 95 x 68 x 250 mm, with the balance point in the handle rather than at the nozzle.