G103 Eight Mode High Speed Hair Dryer Salon Finishing Stable Airflow Control
G103 eight mode high speed hair dryer with 110,000 RPM airflow, water ion care and a 337 g body for salon finishing.
Eight Blowing Modes
,Salon Finishing Control
,Stable Airflow
Product Overview
Eight modes are useful only if they are actually different. On the G103 the settings separate scalp drying, body drying, root lift, shaping and cool finishing, each with its own airflow and heat combination rather than a renamed version of the same setting.
The platform underneath is the 1600 W heater, 110,000 RPM BLDC motor and 250 million water ion module, with the NTC loop holding the outlet band. A four colour indicator keeps the heat setting readable while both hands are busy.
The air multiplier duct turns the motor stream into a wide velocity band, so a pass covers the section rather than a line. Eight airflow modes set how that band is used, from scalp drying to cool finishing, and the four colour temperature lights make the active heat band readable across a salon floor.
Heat sits under an NTC loop that samples outlet temperature fifty times per second. The correction happens before the element overshoots, which is the difference between a fast dryer and a hot one: the section dries quickly without the surface reaching the temperature where colour and keratin treatments break down.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Name | G103 High Speed Hair Dryer |
| Model | G103 |
| Main Functions | Fast drying, water ion care, NTC constant temperature, four colour indicator |
| Motor | 110,000 RPM BLDC brushless motor |
| Hair Type | All hair types |
| Max Power | 1600 W |
| Voltage | Customizable (110V or 220V build to order) |
| Application | Salon finishing, home styling, travel retail |
| Airflow | Air multiplier duct |
| Drying Speed | 15 second rapid drying on short hair |
| Temperature Control | NTC intelligent control, 50 samples per second |
| Negative Ion | 250 million water-ion output |
| Blowing Modes | 8 modes |
| Indicator | Four colour temperature lights |
| Dimensions | 95 x 68 x 250 mm |
| Weight | 337 g |
Application Fields and Advantages
- Modes that differ in behaviour: each setting changes airflow and heat together, which is what makes a styling sequence repeatable
- Readable while both hands are busy: the four colour indicator confirms the heat band without interrupting the pass
- Eight airflow modes: scalp drying, body drying, styling and cool finishing are separate settings rather than one compromise
- Four colour indicator: each light maps to a heat band, so the setting is readable across a salon floor
- Water ion care: 250 million ions ride the airstream and settle static during the drying pass
- Balanced at 337 g: the weight sits in the handle, which matters on the last section of a long session
Customization Service
Small Batch Customization OK | Packaging Customization OK | Color Customization OK | Free Sampling OK |
Product Q&A
Q: Which modes suit finishing work?
A: The lower airflow modes with the middle heat bands give the control a round brush needs; the cool setting locks the shape.
Q: Can the mode set be limited for a market?
A: Yes. The control board can be configured to a narrower set for hotel or retail programmes.
Q: Can the voltage be set for the destination market?
A: Yes. Each order is assembled for the destination supply in 110V or 220V builds, with rating label and plug type set at packing.
Q: Why four colour lights instead of one?
A: Four lights map to four heat bands, so the active band is readable at a glance and from a distance, which matters on a salon floor and in shared use.
Q: Does the ion output depend on the mode?
A: The module runs from its own supply inside the barrel, so output stays stable across the eight airflow modes and the four heat bands.
Q: Is the body light enough for long sessions?
A: The unit weighs 337 g at 95 x 68 x 250 mm, with the balance point in the handle rather than at the nozzle.