D2 Air Straightener Brushless Motor Fast Drying Airflow Dual Power Versions
D2 air straightener is driven by a 110,000 RPM BLDC motor that moves fast drying airflow, in 1400 W and 1600 W versions for retail and salon channels.
Fast Drying Airflow
,Brushless Motor
,Dual Power Versions
Product Overview
The D2 is built around motor speed rather than heater size. A 110,000 RPM BLDC brushless motor produces the air velocity that lifts surface water off the section quickly, and the same pass smooths the hair as it dries. Because the drying work is done by airflow, the tool does not need a hot plate to remove moisture.
Two power versions are produced: 1400 W and 1600 W. The lower version suits retail and travel-oriented channels, while the 1600 W build is specified for salon stations where the tool runs for long stretches. Both share the same motor, three airflow levels and four temperature levels, so the styling behaviour stays consistent across the range.
Fast airflow has to stay controllable. Three airflow settings let the operator choose between a quick pass that removes water and a slower pass for shaping, and four temperature levels set how much heat reaches the section. Auto pause stops heating when the tool is set down, and the 220 g body keeps the wrist neutral through a full head of hair.
The platform is still open, which matters for buyers with a specific market in mind. Voltage version, housing structure, motor tuning and packaging are configured per project, and the build has not been tooled yet, so changes that would normally need a new mold are still on the table. Standard orders start at 2000 pcs per model with 35 days lead time after deposit and artwork approval.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Name | D2 Air Straightener 110000 RPM BLDC Motor Fast Drying Airflow 1400W 1600W |
| Model | D2 high speed air straightener |
| Type | 2-in-1 hair drying and straightening |
| Motor | 110,000 RPM BLDC brushless motor |
| Rated Power | 1400 W - 1600 W |
| Rated Voltage | 220-240 V AC, 50/60 Hz standard; other voltages available as a custom build |
| Airflow Settings | 3 levels |
| Temperature Settings | 4 levels |
| Idle Control | Auto pause mode and standby mode |
| Hair Condition | Dry and wet dual purpose |
| Display | LCD colour screen |
| Net Weight | 220 g |
| Dimensions | 320 x 34 x 46 mm |
| Certification | ISO 9001, CE (LVD and EMC), CB, FCC, RoHS |
| Minimum Order Quantity | 2000 pcs per model standard; custom builds quoted per project |
| Lead Time | 35 days after deposit and artwork approval |
| Packaging | Printed colour box, 12 pcs per export carton |
| Loading Port | Ningbo or Shanghai, China |
Application Fields and Advantages
- Speed over heat: air velocity from the 110,000 RPM motor removes surface water, so drying does not depend on plate temperature.
- Two power versions: 1400 W for retail channels and 1600 W for salon use, on the same motor platform.
- Controlled fast drying: three airflow levels separate a quick pass from a slower shaping pass.
- Comfortable in long use: a 220 g body and 320 x 34 x 46 mm frame keep the tool balanced in the hand.
- Station-friendly: auto pause and standby mode reduce idle heat between clients.
- Tunable platform: motor behaviour, voltage version and airflow settings can be adjusted per project.
Customization Service
The D2 platform has not been tooled yet, so customization is not limited to colour and logo. Electrical version, housing structure, attachment options and packaging are all open at project stage, which is why the model sits in the custom hair dryer range rather than as a fixed catalogue item.
OEM Package
Logo printing on the housing, a printed colour box, the user manual and the care guide card, from 2000 pcs per model. Artwork proof is returned in five working days and a pre-production sample is couriered in 5-7 days before mass printing starts.
ODM and Custom Build
Housing colour and structure, motor tuning, voltage version and attachments are configured per project and quoted separately, because each change needs a dedicated engineering pass. An attachment such as a comb head can be developed if the channel needs one; it is not part of the current build.
Documents and Labelling
Test reports are issued per production batch, and buyers registering the product on a marketplace receive the declaration of conformity in their own company name. Carton marking, manuals and rating labels are printed to the buyer's brand.
OEM Logo Printing OK | Printed Colour Box OK | Standard MOQ 2000 pcs | Custom Build Quoted |
Product Q&A
Q: Why does motor speed matter for drying?
A: Air velocity lifts surface water off the section. A 110,000 RPM BLDC motor delivers that airflow without relying on a hot plate, so the hair is dried and smoothed in one pass.
Q: Which power version should we order?
A: 1400 W suits retail and travel-oriented channels, 1600 W suits salon stations with long running hours. Both use the same motor platform.
Q: Can the motor be tuned for a specific market?
A: Yes. Motor behaviour and airflow settings are part of a custom build, and the platform has not been tooled, so the change does not need a new mold.
Q: Can we order a 110 V version?
A: Yes, as a custom build. The standard specification is 220-240 V AC 50/60 Hz, and other voltages are configured per destination market.
Q: What are the order terms?
A: 2000 pcs per model on the standard build, USD 14-28 per piece depending on configuration, T/T payment, 35 days lead time after deposit and artwork approval, shipped from Ningbo or Shanghai.