A9L Balanced Body Hair Dryer Brand Plate Seat and Dual Nozzle Set on One Collar
A9L balanced hair dryer sets the balance point at the grip inside a light body, with a moulded brand plate seat and styling and volumising nozzles on one collar.
Balanced Body Build
,Brand Plate Seat
,Dual Nozzle Set
Product Overview
This build centres on a 390 g balanced body with a 63 mm barrel, and the balance point sits at the grip so the unit can be held at shoulder height through a full appointment without the wrist taking the load at the end of a lever.
A 110,000 RPM brushless motor drives a high static pressure air column, and the short duct keeps velocity at the outlet. The heater stays in a moderate band behind the airstream, so drying comes from air volume rather than a hot surface, which matters on colour-treated sections.
A 200 million plasma module sits inside the airflow and works on the hair surface, while a 650 nm red light matrix covers the scalp line on a separate switch. Twelve drying modes and an LED display cover the settings, and a TOF sensor trims output as the nozzle approaches the scalp.
The styling nozzle and the volumising nozzle share one collar, the cord runs 1.8 m as standard with a 3 m option, and a three-axis gyroscope pauses output when the unit is set down. The shell is heat-resistant ABS with a spray-painted finish and mounting points for a brand plate.
Technical Specifications
| Parameter | Specification |
|---|---|
| Main Functions | Fast drying, scalp protection, AI distance sensing, intelligent temperature control, plasma and red light care |
| Motor | 110,000 RPM BLDC brushless motor |
| Hair Type | All hair types |
| Max Power | 1400W / 1600W |
| Voltage | Customizable (110V or 220V build to order) |
| Application | Salon use / home use |
| Airflow Levels | 3 levels |
| Temperature Levels | 3 levels |
| Nozzles | 1 styling nozzle included; volume nozzle optional |
| Material | Heat-resistant ABS |
| Surface Finish | Spray painting |
| Power Cord | 1.8 m (3 m customizable) |
| Dimensions | 65.9 x 75 x 249 mm |
| Weight | 390 g |
| Noise Level | 59 dB(A) |
| NTC Temperature Control | 110 samples per second, real time monitoring |
| Constant Temperature Setting | 55 degrees C |
| Plasma Module | 200 million class plasma care |
| Display | LED digital display |
| Distance Sensing | TOF sensor |
| Motion Sensing | Three-axis gyroscope auto stop |
| Working Modes | AI mode, child mode, styling mode, plus 9 airflow x temperature combinations |
| Nano Red Light | 650 nm red light hair care |
| Drying Combinations | 12 modes total: 9 airflow x temperature combinations + AI, child, styling |
Application Fields and Advantages
- 390 g balanced body: a grip-centred balance point keeps the load in the palm rather than at the wrist.
- High static pressure in a 63 mm barrel: the short duct limits pressure loss, so velocity holds at the outlet.
- Drying by airflow: a moderate heat band behind a high-velocity column protects colour-treated sections.
- Plasma and red light: surface smoothing from 200 million plasma and a 650 nm scalp matrix, each on its own switch.
- Pause on set-down: the gyroscope stops output mid-appointment, so the element does not run against a surface.
- Brand plate seat: the housing carries mounting points for a brand plate, so a logo sits flush on a moulded seat.
Customization Service
Small Batch Customization OK | Packaging Customization OK | Color Customization OK | Free Sampling OK |
Product Q&A
Q: What makes the body comfortable for long appointments?
A: 390 g total weight, a 63 mm barrel and a balance point at the grip, with the motor on a damped mount so vibration ends at the handle.
Q: How does the dryer handle thick sections?
A: High static pressure pushes air into dense hair, and the twelve modes include settings for thick and coarse sections.
Q: Are the plasma and red light functions always on?
A: No. Each has its own control, so a smoothing pass or a scalp routine can be run independently of the other.
Q: Does the housing accept a brand plate?
A: Yes. The shell has mounting points for a plate, and pad printing or laser marking is used on flat areas where a plate is not required.
Q: What is the noise level?
A: Around 59 dB(A) at full speed, with the motor on a damped mount inside the barrel.
Q: What is included with the unit?
A: A styling nozzle, a volumising nozzle, a 1.8 m cord as standard with a 3 m option, and an LED display showing mode and heat stage.