A9M AI Hair Dryer Intelligent Temperature Control and Scalp Protection Hair Dryer
A9M AI hair dryer with NTC control sampled 110 times per second, 55℃ constant temperature mode, 1600W output and a 110,000 RPM BLDC motor for salon scalp-protection drying.
NTC 110 Times Per Second Monitoring
,55℃ Constant Temperature Scalp Protection
,AI Mode Automatic Heat Control
Product Overview
The ADAWO A9M AI Hair Dryer is built for salon chairs and demanding home users who need controlled heat rather than raw heat. An NTC thermistor sits directly in the air path and samples the outlet temperature 110 times every second, feeding a correction loop that keeps the hair surface inside a narrow temperature band instead of letting it swing between overheating and cooling down. Paired with a 110,000 RPM brushless DC motor and 1600W maximum output, the A9M moves a large volume of air at a moderate temperature, which is the practical way to shorten drying time without stripping moisture out of the cuticle too quickly.
The 55℃ constant temperature setting holds airflow at a fixed setpoint while the heater element modulates continuously. This is the setting salon owners reach for on fine, colour-treated and bleached hair, because the cuticle never enters the temperature range where protein damage accelerates. AI mode goes one step further: the controller reads motor load together with the outlet temperature trend and adjusts heat and airflow as one system as the hair moves from soaking wet to nearly dry. A stylist gets one continuous drying pass instead of a wet phase on high heat followed by a dry phase that scorches the ends.
Twelve working modes come from three airflow levels and three temperature levels plus AI, child and styling modes, and the LED digital display on the rear panel shows the active combination so a dryer can be handed to a colleague and deliver identical results. A 200 million class plasma module releases ions into the airstream to cut static and help the cuticle close flat, while 650 nm nano red light is delivered through the nozzle ring during the same pass. The housing is moulded in PC and nylon, finished by spray painting or electroplating, and the complete unit weighs 358 g, which matters across a full appointment book.
Two sensors handle the failure modes that actually cost salons money. A TOF sensor measures the distance to hair and scalp and reduces output when the nozzle is brought too close, and a three-axis gyroscope detects when the dryer is set down and stops heating automatically. For distributors, the platform is straightforward: destination-voltage input, a 1.8 m power cord with a 3 m option, and a full certificate pack covering UL, CE, CB, FCC, KCC, PSE and RoHS for the markets that request them.
Technical Specifications
| Attribute | Specification |
|---|---|
| Product Name | ADAWO A9M AI Hair Dryer |
| Main Functions | Hair care fast drying, scalp protection, high airflow, intelligent temperature control |
| Motor | 110,000 RPM BLDC brushless motor |
| Hair Type | All hair types |
| Max Power | 1600W |
| Voltage | Customizable (110V or 220V build to order) |
| Application | Salon use / home use |
| Airflow Levels | 3 levels |
| Temperature Levels | 3 levels |
| Nozzles | 1 styling nozzle included; volume nozzle optional |
| Material | PC / Nylon |
| Surface Finish | Spray painting / electroplating |
| Power Cord | 1.8 m (3 m customizable) |
| Dimensions | 65.9 x 75 x 249 mm |
| Weight | 358 g |
| NTC Temperature Control | 110 samples per second, real time monitoring |
| Constant Temperature Setting | 55 degrees C |
| Plasma Module | 200 million class ion output |
| Display | LED digital display |
| Distance Sensing | TOF sensor |
| Motion Sensing | Three-axis gyroscope auto stop |
| Working Modes | AI mode, child mode, styling mode, plus 9 airflow x temperature combinations |
| Nano Red Light | 650 nm red light hair care |
| Drying Combinations | 12 modes total: 9 airflow x temperature combinations + AI, child, styling |
Application Fields and Advantages
- Salon drying and finishing: the 55℃ constant temperature setting and nine airflow and heat combinations let a stylist run a repeatable finish on every client.
- Colour-treated and bleached hair: continuous NTC sampling at 110 times per second keeps the cuticle below the damage threshold during long drying passes.
- Scalp-sensitive clients: the TOF distance sensor reduces output when the nozzle approaches the scalp, which limits the most common cause of salon complaints.
- Home and family use: AI mode removes the guesswork for users who do not want to adjust heat manually, and the three-axis gyroscope stops heating when the dryer is put down.
- Private label programmes: colour, packaging and voltage can be specified to match the target market.
Customization Service
Small Batch Customization OK | Packaging Customization OK | Color Customization OK | Free Sampling OK |
Product Q&A
Q: How often does the NTC sensor sample the temperature?
A: 110 times per second. The controller corrects heater output on the same cycle, so the drift between samples stays inside the working band rather than being corrected after the fact.
Q: What does the 55℃ constant temperature setting actually hold?
A: It holds outlet air temperature at 55℃ while the heater modulates. Airflow can still be changed across the three airflow levels, so drying speed is adjusted without changing the heat the hair receives.
Q: Does AI mode replace the manual settings?
A: No. It is one of three working modes alongside child mode and styling mode, and it sits on top of nine airflow and temperature combinations. Stylists who want fixed settings keep full manual control of the three airflow and three temperature levels.
Q: Is the A9M suitable for 110V markets?
A: Yes. The input voltage is built for the specific destination, with certificates covering UL, CE, CB, FCC, KCC, PSE and RoHS.
Q: Which nozzle is included with each dryer?
A: One: the styling nozzle ships with each dryer. The volume nozzle is an optional accessory that mounts on the same front ring and can be added to the order. Gift box packaging is available on request.